When I create a circular pattern the original features i patterned disappears, how to fix it?

Today doing the pattern circulation, do not work, so I went to website to look for clues , find two approach.

1. When I create a circular pattern the original features i patterned disappears, what is causing this?
https://forum.solidworks.com/thread/42537
The expert suggest to It is in feature mode, I just went ahead and used the circular patterns in my sketchs, thanks.


2. The holes show up in the preview function while creating the pattern, but disappear as you complete the pattern.
the expert also suggest use in feature mode, but here is the part I dont understand though
http://www.eng-tips.com/viewthread.cfm?qid=247760
The problem you're seeing is due to the fact that the original Hole Wizard feature you created just shows the original component it cut in the Feature scope for components affected by the Hole Feature. When the feature is circular patterned the pattern feature gives no option for additional parts to intersect. To fix the issue modify your Hole Wizard Assembly feature to include any components that you want to cut when patterning the Assembly feature.

The original Hole won't cut the other components but when it's patterned the holes will appear in any components selected in the Feature Scope Group box. These components must be selected manually in the original feature see attached file.

maths in solidworks

lol, today using solidwork to draw a stent using wrap function,

it end up myone has a small gap in between, it shows the advantage of using divide operator, as it always leave the decimal place.
http://solidjott.com/does-anyone-know-if-there-is-a-way-to-cr/2009/05/13/

maths not good enough

how to fix solidworks problem

Here is the fixed crack for Solidworks 2011 provided by SSQ. This was only tested on SP0 x64 version.

This will fix those errors you sometimes get with the x64 version (Error: Can not initialize library (%d, %d, %d)" or " Error: Can not open handle (%d, %d, %d)") etc.

Basic instructions:

1. Disconnect internet connection

2. Install Solidworks 2011 with a key provided in the SSQ NFO.

3. Drag the "setup" folder from "SW2011_SSQ_fixed" to "C:\Program Files\SolidWorks\" and click Yes to merge and then overwrite/replace all files windows asks about

4. Navigate to "C:\Program Files\SolidWorks\setup\i386\x64_fix" and run "ServiceInst.exe"

5. Navigate to "C:\Program Files\SolidWorks\setup\i386" and run "swlmwiz.exe" click yes or ok both times and let the patcher run.

6. Connect internet

Solidworks 2011 should now be patched. My instructions are for x64 version, I have not tested the x86 version.

I think that you will have to run this patch every 30 days to reset the trial timer.

Enjoy

Solidwork bypass

The nightmare of my life when i wake up ,just found out is i cannot open the solidwork.
i use crack as it is for individual and i am just a poor guy...
when it will be horror ,if it is not work anymore.

piratebay give me a chance to learn, thanks piratebay and all the contributors.
it is the only way to make our world better.

luckily i found it only repeat 30 days...and it relieve my life



Here is the fixed crack for Solidworks 2011 provided by SSQ. This was only tested on SP0 x64 version.

This will fix those errors you sometimes get with the x64 version (Error: Can not initialize library (%d, %d, %d)" or " Error: Can not open handle (%d, %d, %d)") etc.

Basic instructions:

1. Disconnect internet connection

2. Install Solidworks 2011 with a key provided in the SSQ NFO.

3. Drag the "setup" folder from "SW2011_SSQ_fixed" to "C:\Program Files\SolidWorks\" and click Yes to merge and then overwrite/replace all files windows asks about

4. Navigate to "C:\Program Files\SolidWorks\setup\i386\x64_fix" and run "ServiceInst.exe"

5. Navigate to "C:\Program Files\SolidWorks\setup\i386" and run "swlmwiz.exe" click yes or ok both times and let the patcher run.

6. Connect internet

Solidworks 2011 should now be patched. My instructions are for x64 version, I have not tested the x86 version.

I think that you will have to run this patch every 30 days to reset the trial timer.

Enjoy